 |
|
 |
| THE KEY MUST BE IN THE LOCK TO TURN THE HANDLE AND RETRACT THE BOLTS |
| Start by removing all the hardware from the outside of the door. The cover is held by one screw under the handle and 2 drive in tabs. Be careful not to break the tabs when you pry it off. Remove the handle by taking out the spring retainer (Like on a GM window crank handle). Cut the outside of the dial off leaving the knurled knob. |
 |
| Drill point |
| Cut --------- |
| SENTRY PAGE 2 |
 |
| Drill a hole at the drill point being careful not to drill into the wheel pack. The safe door is about 7" thick but it is easy to drill. Dial r/l/r as you insert a probe into hole or scope for drop ins. Insert key and turn to open. If the key does'nt work or you have no key, you will either have to pick or drill the lock. |